Top Chem 2008

Top Chem 2008

Characteristics & Main Applications
KLINGER®top-chem-2005 has excellent chemical resistance in strongly acidic applications and is suitable for a wide range of applications in the chemical industries. It has good mechanical properties at medium temperatures and loads. The material is the economical alternative at the usage of modified PTFE gaskets. KLINGER®top-chem is also known as topchem or top chem.

Material
PTFE-Basis

pT Diagram 

Click to enlarge

The Klinger pT diagram provides guidelines for determining the suitability of a particular gasket material for a specific application based on the operating temperature and pressure only. Always refer to the chemical resistance of the gasket to the fluid. &nbsp 1. In area one, the gasket material is normally suitable subject to chemical compatibility. 2. In area two, the gasket materials may be suitable but a technical evaluation is recommended. 3. In area three, do not install the gasket without a technical evaluation. Always refer to the chemical resistance of the gasket to the fluid.

Click to Download Technical Data Sheet
Click to Download MSDS (Material Safety Data Sheet)

Dimensions of the Standard Sheets
Sizes: 1500 x 1500 mm Thicknesses: 1,0 mm, 1,5 mm, 2,0 mm, 3,0 mm Tolerances: thickness ± 10%, length ± 50 mm, width ± 50mm Other thicknesses and sizes on request.

Function & Durability
The performance and service life of KLINGER gaskets depend in large measure on proper storage and fitting, factors beyond the manufacture’s control. We can, however, vouch for the excellent quality of our products. With this in mind, please also observe our installation instructions.

KTW proposal – Download PDF
DIN-DVGW certificate – Download PDF
FDA conformity – Download PDF
TA-Luft (Clean Air) certificate acc. VDI 2440 – Download PDF
Germanischer Lloyd certificate – Download PDF