1005

Construction: TEADIT style NA-1005 is a compressed non-asbestos jointing-sheet material produced from Aramid fibres, bonded with Nitrile Rubber (NBR). It is being manufactured by means of a hot calender process under rigorous quality control standards which are registered under ISO 9001 certification.   Application / service: Style NA-1005 is indicated for air, brine, water, low pressure steam, organic and weak inorganic acids, diluted and concentrated alkalis, petroleum derivatives, synthetic and vegetable oils, aliphatic and chlorinated solvents, refrigerants, gases and chemical products in general. Typical physical properties NA-1005 in ASME ASME test Properties Values F 36 Compressibility 7-17% F 36 Recovery 45% F 146 Weight increase 5h/ASTM oil/Nr.3 @ + 150°C 15% 5h/ASTM Fuel B @ +21-29°C 15 % F 146 Thickness increase: 5h/ASTM oil/Nr. 3 @ +150°C 12% 5h/ASTM Fuel B @ +21-29°C 10% F 152 Tensile strength (transverse) 11,5 N/mm² DIN 52913 Residual stress 28 N/mm² F 38 Creep relaxation 25% F 37 A Sealability at 1000 psi 0,25 ml/h – Density app. 1,75 g/cm³

ASME test Properties Values
F 36 Compressibility 7-17%
F 36 Recovery 45%
F 146 Weight increase5h/ASTM oil/Nr.3 @ + 150°C5h/ASTM Fuel B @ +21-29°C 15%15%
F 146 Thickness increase:5h/ASTM oil/Nr. 3 @ +150°C5h/ASTM Fuel B @ +21-29°C 12%10%
F 152 Tensile strength (transverse)  11,5 N/mm²
DIN 52913 Residual stress 28 N/mm²
F 38 Creep relaxation 25%
F 37 A Sealability at 1000 psi 0,25 ml/h
Density app. 1,75 g/cm³

 Product standard: thickness: 0,5 / 1,0 / 1,5 / 2,0 / 2,5 and 3,0 mm sheet size: 1.500 x 1.600 mm, 1.500 x 3.200 mm   The P x T diagram above indicates the service limits for NA-1005 considering the simultaneous influence of pressure and temperature (chemical suitability assumed). The green area represents the normal service limits, while the orange coloured area shows the maximum application limits. For those cases, please consult our technical department. Technical data: Peak temperature: + 400°C Constant temperature: + 240°C Peak pressure: up to 110 bar Constant working pressure: 50 bar Colour: blue

 

Leave a Reply

Your email address will not be published. Required fields are marked *